Type: K2

Qty: 1 Ltr

State: Liquid.

Application: Clean Welds Seams.

The chemical K-2 is available in 3 forms as follows giving the same results. Application of K-2 Passivation solution is a must after the application of all forms of K-2 chemical in order to avoid further corrosion and contamination It is used to clean weld seams and the areas surrounding the welds.

It is used to clean weld seams and the areas surrounding the welds.

HOW TO APPLY K - 2 PASTE

1. S1-56 - Degreaser (Removal of oil 50gm/lit.) Apply liquid S1-56 - Degreaser on to the surface for 5- 10 minutes. Then wash the surface thoroughly with water.

2. K-2 paste is to be applied on the weld seam and surrounding area with a brush.

3. Leave the K-2 paste on the weld seam for 15-45 minutes depending on the thickness of the oxide scale.

4. Scrub the surface with a plastic bristled brush and then wash surface thoroughly with water.

5. Apply K-2 passivation on the surface and leave it for 10 – 15 minutes.

6. Wash the surface thoroughly with water.

Rates of the following products are subject to change without prior notice. 

No guarantee for breakage or thickness leakage for commercial and light duty Fittings. Pressure rating for each fittings varies of different sizes no guarantee will be provided for the same, The sizes,images and dimension may vary according to the different range of product. Please Confirm the exact details before placing the order. Thickness may vary according to different size and quality. Contact us for in depth technical details. T.C will be provided on special request for heavy duty fittings only. We recommend you to order heavy duty filings where highest reliability is required. No refund will be made for wrong size orde